system Archives - Advance Storage Products

How to Make a Rack System That Lasts 20 Years

6 years ago

When properly designed, constructed, installed and maintained, a pallet rack system will provide years of safe, trouble-free service. When properly engineered, pallet rack systems are loaded well within their ultimate design capacity and the stress caused by day-to-day loading and unloading cause virtually no “wear” to the structural components. If properly used and not damaged, we […]

by Mads Jespersen
Automation, Cold Storage, Inventory Flow
No Comments

When is Your Operation a Good Candidate for an automated storage and handling system?

7 years ago

Automated storage and handling systems can substantially increase your throughput and storage density capabilities but how do you know if an automated storage and retrieval system will benefit your warehouse operations? Here are a few things to consider: When your operation is running 18-24 hours a day, 5 to 7 days a week: Typically single […]

How Much Weight Can a Rack System Hold?

7 years ago

While this is one of the most frequently asked questions, the answer is unfortunately, “it depends”. How much weight a rack system can hold depends on a number of factors including: Load Beam Capacity: The first step in determining a rack system capacity is what weight can each pair of beams hold. Beam capacity varies […]

How Do You Maintain A Safe Rack System?

7 years ago

Rack systems should be inspected by a qualified rack system inspector at least once a year, more often if there is frequent system damage. Results of the inspections should be documented and maintained for future reference. While a visual inspection will show obviously damaged it is very important to follow a few simple steps. These […]

How Much Does a Rack System Cost?

7 years ago

When selecting a rack system, it is important to look at the total system cost, rather than just the rack itself to ensure that you are selecting the overall system that will provide the best long term value for the operation. Some factors to consider: Style of Rack: Rack systems can range from single deep […]

What to do if a Rack System is Damaged

7 years ago

Rack systems are designed to meet a specific set of load and performance criteria based on the assumption that the components are intact and not damaged. Any time a component is damaged, the capacity/integrity of the system is reduced and compromised. Significant damage to a single component, or an accumulation of damage to multiple components […]

7 Mistakes to Avoid When Designing a New Distribution Center

7 years ago

Designing a new distribution center is a complicated process involving numerous factors that must be addressed to ensure success. After observing thousands of rack system project installations, below are a few common mistakes that we have seen made during the design process that either delay or slow the opening of the facility, or longer term […]

How Does a Pushback Rack System work?

7 years ago

When distribution facility operators are looking to densify their storage layout (store up to twice as many pallets in the same facility when compared with selective rack), many times Pushback Rack systems can be an excellent alternative. A pushback rack system is a LIFO system, normally composed of an inclined rail section that extends the […]

by John Krummell
Cold Storage, Consumer Packaged Goods, Food & Beverage, Grocery, Picking, Racking
No Comments

What are the different types of rack and why select one vs. another?

7 years ago

There are many different types of pallet racking configurations that can be selected by end users depending on their storage needs. They range from low density selective rack all the way to high-density pushback , drive in, and pallet flow systems. Each configuration has advantages and disadvantages: Selective Pallet Rack: Single selective pallet rack is […]

Tag: <span>system</span>

Create your account

Log in to Your Account