Selective Pallet Racking Systems

Selective RackSelective Rack is a commonly used rack system, but not all rack systems are equal. ASP (Advance Storage Products) bolted structural pallet rack exceeds the RMI (Rack Manufactures Institute) racking standards of quality, long life and durability along with IBC (International Building Code) standards for structural design.

 button get a quote

 

  • Description
  • Technical Data
  • Brochure

Selective Rack accommodates flexibility in slotting design ideal for high turnover, high SKU stock count and quick product accessibility. Selective rack is a cost-effective design allowing for the maximum number of SKU pick facings available in standard rack.
Benefits of selective rack include low cost and high selectivity of products. A challenge with selective rack systems is that selective rack offers the least utilization of cubic storage space available. The space allocated for lift truck aisles adds up to a large percentage of a storage area not used to store material.

Single selective rack uses first-in first-out (FIFO) inventory management and provides immediate access to store and retrieve pallets. Double deep selective rack uses first-in last-out (FILO) inventory management. While access to product can be delayed due to position, the density of a double deep system is twice that of a single selective rack.
Selective rack consists of vertical upright frames and horizontal load beams.  Configuration (lengths, widths and load bearing capacity) of the system is custom engineered and determined by many factors such as weight, size of the load, customer requirements and the physical layout of the warehouse. ASP beams are bolted to the uprights (1” or 2” vertical adjustability) creating a structurally sound, flexible, and heavy weight-bearing system backed by over 50 years of experience.

Accessories for selective rack systems include::

  • Pallet supports – bolt to front and rear load beams to prevent accidental fall through
  • Wire mesh deck panels
  • Rigid row spacers
  • End of row guards (floor mounted or rack supported)
  • Offset load stops to prevent pallets from being pushed off the rear of the beam level
  • Industrial safety netting

selective pallet rack 

Click to download more information about the Selective Pallet Rack.

Brochure

Selective Rack

selectiveClick to Download

Structural Pallet Rack Brochure

Learn more about Advance’s Structural Pallet Racks by downloading the PDF brochure below.

Selective rackStructural Rack Brochure

 

Structural Pallet Rack Types

Selective Pallet Racking Systems

Selective RackSelective Rack is a commonly used rack system, but not all rack systems are equal. ASP (Advance Storage Products) bolted structural pallet rack exceeds the RMI (Rack Manufactures Institute) racking standards of quality, long life and durability along with IBC (International Building Code) standards for structural design.

Read more ...

DRIVE IN

Drive InDrive-In rack systems provide a low budget, high density storage solution for customers with lower SKU counts. Drive-In rack systems load from the back to the front (First-In Last-Out) as the forklift literally drives into the rack system, loads the pallet onto rails and backs out of the rack system. As the system is loaded rear to front, it must it be unloaded front to rear.

 

Read more ...

2 WIDE DRIVE IN

2 WIDE DRIVE INThe 2 Wide DITM warehouse storage rack delivers maximum efficiency for high density storage. This racking system allows twice the loading and unloading capacity in a single run while increasing forklift stability.

Read more ...

Double Deep Reach Pallet Rack

Double Deep ReachStore 2 pallet positions from a single aisle (4 pallets back to back) with the Double Deep Selective Rack.  The rear pallet is accessed with a special fork truck with a pantograph extender. The Double Deep Reach warehouse racking system provides high density storage at a lower initial capital cost when compared with other high density storage systems.

 

Read more ...

HIGH BAY STORAGE

High Bay StorageWith the cost of land and building foot prints continuing to increase, warehouse rack systems continue to reach for the skies.

High Bay industrial storage systems can exceed 60' in height, nearly doubling the storage capacity of conventional systems and both fully automated and man up vehicles are available. Some of the racking systems available through Advance Storage Products allow vehicles to be moved between aisles to reduce initial capital costs.

Read more ...

VERY NARROW AISLE

Very Narrow Aisle systemsVery Narrow Aisle pallet rack systems typically have 72'' wide aisles and are accessed by wire guided turret trucks. Many of the Very Narrow Aisle warehouse racking systems have automated position locators that allow for very rapid access to loads.

Read more ...

PICK MODULES

Pick Module-Bay viewDesigned for high volume applications, Pick Module pallet racks are industrial storage solutions perfect for full and split case picking.

Our Pick Modules can be stacked 3-4 levels high, often with conveyors integrated to the rack system. Modules will often incorporate carton flow, pallet flow, pushback and combinations  for custom material handling.

 

Read more ...

PICK TUNNELS

ov 20High volume single level picking operations can benefit from Pick Tunnels racking systems, as they  provide superior warehouse storage density and cubic space utilization.   Reserve product is stored over the picking aisle in pushback or pallet flow and fed by lift trucks to the picking lines using either pallet flow or carton flow.  This pallet rack configuration provides high density storage,  minimized movement of reserve product, separate put away and picking operations and high product throughput.

Read more ...

Follow Us on linkedin asp logo