Off The Rack - May 5th, 2014

Advance Storage Products
 
Off the Rack
 
 
 
   

As we say goodbye to the long winter and welcome the spring, I am optimistic about the economy and the positive movement in the materials handling industry.  Advance is experiencing some of the economic recovery with record sales in 2013 and continued growth in 2014. 

The RMI has recently released the new guideline "Assessment and Repair or Replacement of Damaged Rack."  This guideline is the industry's first effort to provide a real world process to follow to ensure that rack repair work is performed safely.  As chair of the committee that wrote the document, I came to appreciate how much care is required to perform rack repair properly.  My major takeaway from the nearly yearlong development effort is that it is absolutely necessary to perform any repair work under the supervision of a highly qualified engineer.

 

As always, please contact us if we can help you with your warehouse storage needs.

 

Sincerely,
John Krummell, President/CEO Advance Storage Products

upward graph
INDUSTRY NEWS
  
MHI Revised Forecast
-- Growth in the materials handling industry is projected to be 7%-8% in 2014 and 9%-10% in 2015
-- New orders anticipated to grow by 8% in 2014 and 10% in 2015
--Modest rebound projected for imports and exports by mid-2014 with continuing growth in 2015
 RACK SAFETY
 
  Repair Assessment
 
-- RMI specifies that all damaged rack be isolated and evaluated by a qualified professional (Engineer) prior to repair or replacement of the damaged components 

--  All damage identified by the Supervising Engineer must be repaired or corrected to ensure that the rack system provides a safe working environment 

-- The Supervising Engineer should approve the assessment process and protocol

 

Make sure to consult with a qualified engineer before performing any rack repair.

 

If you would like a copy of the RMI's "Guideline for the Assessment and Repair or Replacement of Damaged Rack" email [email protected]

 

In the next issue:   Best Practices for Assessment with and without documentation  

PUSHBACK RACK OPTIONS AND DEMONSTRATION 
 
For use in high-cube storage facilities, pushback systems provide superior selectivity and cost benefits compared to other deep storage alternatives.  Available in 2 to 6-deep options, pushback provides storage for FIFO (first in/first out) applications.
ABOUT ADVANCE (ENGLISH)
 
  


ONLINE PARTS ORDERING NOW AVAILABLE! 
Need replacement wheels, springs, or stoppers for your Advance racks?  Click here for easy online ordering: 
 
   
mhi
mheda
IARW
 

 
NBWA
 
 
     
 

Off The Rack - February 11th, 2014

Advance Storage Products
 
Off the Rack
 
 
 
   

It's hard to believe we are already well into the new year! 

There are many indicators that the economy is improving, specifically in the materials handling industry. 

 

At Advance, we continue to build strong partnerships with our customers to help them improve their warehouse operations and reach their productivity goals. 

 

Please contact us if we can help you in any way.

 

Sincerely,
John Krummell, President/CEO Advance Storage Products

upward graph
INDUSTRY NEWS

MHI MHEM Market Forecast
Good news:
--New orders for material handling equipment grew by 7% in 2013 and are forecast to grow by at least 8.5% in 2014 and 12% in 2015
--Shipments of material handling equipment grew by 7.4% in 2013 and are forecast to increase by 6.7% in 2014 and 10.7% in 2015
--MHEM imports and exports are expected to rebound in the middle of the year
  
  RACK SAFETY
 
  Rack Repair
 
 The following are options for repairing damaged rack:

 -- Replacement: when original or updated engineering documentation is available, replacement of damaged components with identical parts from the original manufacturer may be an option (the rack system will still need to meet capacity requirements)

  

-- Rack Repair Kits:  depending on the situation, the damaged section of an upright can be replaced with a pre-engineered rack repair kit, which is typically bolted or welded in place and anchored to the floor)

 

-- Welded Field Repair:  in some cases, welded repair may be done in the field (all work would have to be in compliance with all appropriate codes) 

 

Make sure to consult with a qualified engineer before performing any rack repair.

 

In the next issue:   Repair Assessment  

MAXIMIZE HIGH DENSITY STORAGE AND PRODUCTIVITY 
 
The 2Wide DI (2 wide drive in) delivers the maximum efficiency for high density storage.  Designed to meet your specific needs, the2Wide DI allows twice the loading and unloading capacity in a single run while increasing forklift stability.
  
2Wide Drive In
2Wide Drive In

ONLINE PARTS ORDERING NOW AVAILABLE! 
Need replacement wheels, springs, or stoppers for your Advance racks?  Click here for easy online ordering: 
 
   
mhi
mheda
IARW
 

 
NBWA
 
 
     
 

Off the Rack - October 10th, 2013

Advance Storage Products

Off the Rack

 

 

 
   

As we continue into the second half of 2013, we'd like to share some encouraging industry information with you. 
We hope you are enjoying a prosperous year. 

Sincerely,

John Krummell, President/CEO Advance Storage Products

 

upward graphINDUSTRY NEWS


MHI MHEM Market Forecast

--Housing, Auto rebounds and expansion in Industrial, Warehouse and Commercial Buildings will contribute to improved MHEM growth for 2014 and beyond 

--MHEM Shipments and Domestic Demand are expected to grow in 2013 and 2014  

 

Bloomberg reports that manufacturing expanded in July at the fastest pace in two years. 

 

 

 
  RACK SAFETY

 
   Rack Safety Issues    

The following rack conditions may lead to potential   unsafe conditions in any warehouse with a rack system:

  • Overloaded rack--any changes made to a rack system must have appropriate engineering supervision and approval drawings verifying the load bearing capacity
  • Damaged rack--any damage to a rack system will reduce the capacity of the system
  • Unsupervised rack repair--any repair or replacement work needs to be performed by qualified professionals working to RMI design codes
  • Mix and match reconfigurations--if product from 2 different suppliers is to be combined, be sure that proper approval is provided from both manufacturers or a qualified engineer
  • Misapplication (pallet and product)--rack systems are designed for specific pallet and load combinations--be sure to have any changes to pallets or load application approved by your supplier  

In the next issue:   Repair Options 

CHOOSING THE RIGHT RACK SYSTEM 

A visual comparison of structural vs. roll form rack 

Choosing the Right Rack System 

Choosing the Right Rack System

 

 

ONLINE PARTS ORDERING NOW AVAILABLE! 

Need replacement wheels, springs, or stoppers for your Advance racks?  Click here for easy online ordering: 

 

 

 

   

mhi

mheda

IARW
 


 

NBWA


 

 

 

 

 

Press Release - Sept. 22, 2013

asp letterhead

FOR IMMEDIATE RELEASE:
Gail Spencer, Marketing Director
Advance Storage Products
Ph:  714-902-2037
Fax:  714-902-9001
[email protected]
www.advancestorage.com

ADVANCE HIRES DAN KELLY AS NATIONAL ACCOUNT MANAGER

FOR IMMEDIATE RELEASE

September 22, 2013 Advance Storage Products is proud to announce and welcome Dan Kelly as National Account Manager. Mr. Kelly brings with him 15 years of experience in the materials handling industry, serving the Southeast, Mid-Atlantic and Ohio Valley regions.

Newsletter

Follow Us on linkedin asp logo